HIGH PRESSURE WASHOUT - washing heads
European built, proven performance concrete mixer washing heads have powerful high
pressure jets that rotate as well as turning, to
cover every surface equally with no missed areas such as seen with the
swinging jet array of other models.
cleaning head shown at right, 4 nozzles, suitable for
small planetary to
large twin shaft or spiral blade mixers. 360º
pattern washes upward as well as downward, giving a
spherical action zone.
Water requirement is 20 gpm for each head at 1000
Offset head positions
eliminate shadow behind shafts.
Long nozzles give an extremely narrow 'pencil' jet
with high cleaning power.
When two or more cleaning heads are used, a
sequencing valve runs one head at a time to ensure
full pressure operation and maximum cleaning action.
Other multi-jet systems can drop the pressure and be
unable to clean hardened deposits properly.
The A80R heads can be used with other types of pump.
Supply your own if you wish.
Experience with other types of washout head showed
that some models suffer from deposits of concrete in
the rotating joints which stall them and necessitate
cleaning. The A80R type is powered by an
internal turbine with large gear ratio, making it
extermely difficult to stall. the result is
long life with freedom from maintenance.
When maintenance is necessary, it is easy to
dismantle and repair.
Each head comes with a mounting plate (not shown),
making it easy to install through a hole in the
Head kits include hoses, valves and mounting
Other heads are available for washing chutes,
conveyors, moulds, trucks etc. We can design a
washout system to your specific requirements.
Contact us for details and prices.