RediLink Mix Design & Quality Control is the most flexible software available for gathering concrete or asphalt material tests, formulating mix designs, collecting product test results and creating reports.  Its central database keeps track of all mix designs, dating every change and storing the history.  New concrete or asphalt formulations can be made at any time or modified as aggregate gradations change.  Mix designs can be modified for use in different products and situations, changes in the basic designs rippling down to preserve your modifications faithfully every time.  The Quality Control module has a set of standard concrete tests built-in, while also allowing the user to add special tests and define acceptance limits.  The system is flexible enough to be used for special products;  block, pavers, pipe, pre-stressed products, tiles, non-concrete products and asphalt as well as ready-mix concrete.  Additionally, it runs in virtually any mixture of languages;  each operator can pick one or other of English/Spanish, English/Chinese etc.

   Download brochure (684K)     Download demo version (13.7MB - requires high-speed)     View RediLink MD QC slide show

RediLink Mix Design & Quality Control is in use in hundreds of ready-mix and asphalt operations, large and small, guaranteeing you a stable, bug-free product.  RediLink was designed in Italy and is already the most widely used system in the country.  Lafarge Italy uses RediLink exclusively in all ready-mix plants.  Colabeton - Colacem Group has RediLink in all 120 ready-mix plants.  RediLink is available immediately for installation anywhere in the world in English, Spanish, French and Italian.  Call us for other language availability.

RediLink Mix Design & Quality Control helps you to compete profitably by: ·         Providing better quality product through modified mix design formulations. ·         Keeping dated records of all changes. ·         Modifying whole families of formulas based on changes to master mix designs. ·         Recording and evaluating all test results to your special standards for each job. ·         Saving money on expensive materials such as cement. ·         Giving you total control of your business.

REDILINK MIX DESIGN

The MIX DESIGN system manages the concrete & asphalt mix design database and all the needed information to produce and control concrete & asphalt mix designs.

It keeps a history of all changes; no modifications can be done without a trail; check the effects of a change months or years later. The central mix design database distributes mix designs to the plants.

Aggregate gradation control - gradation information is stored, for use in mix designs.  The design module recalculates the recommended quantities of each raw material based on raw material gradation.  This feature allows quick and easy modification of batch formulas when the aggregate gradation changes, maximizing product strength and saving on cement.

Storage of historical data is extremely important for two major reasons:

• Concrete failure: a search may be required, to find the cause of the fault;  was it a bad mix design or other problem?

• Low profit: previous configurations can be checked to find out if production used more cement, for example, or if something else was not defined properly.
  

REDILINK QC

The QC system is the quality control system for concrete/asphalt/aggregates. The system defines tests and quality standards. The user can enter samples and measurements performed on the samples; the system will then calculate the results and the success/fail status.   All the common concrete tests are included as standard.
This system is based on a custom report generator enabling it to be adapted to the requirements of any country or state; you can arrange your data the way you want it and create reports to suit special requirements and contract specifications.  You can also create new tests for specialty products, if not already included.  For example, strength tests on block and pipe products.  Alternatively, tests can be generated to your requirements by value-added dealers or Scale-Tron’s software team.

RediLink QC modules:

Test definitions - RediLink QC defines:

- which tests are performed on each product.
- measurements that are performed for each test.
- calculation method and results calculated from the measurements.

Sample entry - Entry of product samples taken from the regular production. The system creates the tests required for each sample and the user enters the measurements.

Reports - Powerful report generator creates any report required from the measurement data.

Operating languages

The default language is English in all systems.  RediLink is multi-lingual however, and can run in several different languages on separate stations simultaneously in the same system, including special scripts such as Chinese.  New languages are added as required;  the procedure is simple and low in cost.  Ideal for OEMs in non-English areas.

STI (Service and Training by Internet)

Redilink's reliability is the best in the industry.  This is not where we stop, however.  Our customers tell us - loud and clear - when they do have a problem.  In order to solve problems quickly and efficiently we have called upon the latest Internet technology.  Through your company network and its Internet connection, or even through a phone connection to the Internet, we can access your system and monitor its progress to pinpoint faults.  Even if the faults are caused by mechanical problems in the plant (90% of all faults are), we can see the resulting holdup and guide the operator to a successful outcome, anywhere in the world.

Our engineers can monitor or control the PC computer running BatchLink or RediLink software, drilling down through levels of menus to check setup data, correct it and, most important, train personnel to understand the processes.  Together with a speaker phone, training sessions for groups can be conducted almost as easily as our trainer being on site.  The cost saving and convenience is obvious.  Scale-Tron is pioneering this technology to make your experience the best possible.

System Description:
The system, running on an industry standard Windows-based PC, can run as a stand-alone application or as part of the RediLink Ready-Mix Management system.  Its central storage database is networked to QC labs and batching stations.

Hardware:
Windows based workstation and TCP/IP networking.

Technology:
Data base : Oracle, MSSQL2000, MySQL
Communication : Internet/Intranet

OEM applications are welcomed.  Contact us for details. 

  Download brochure (684K)     Download demo version (13.7MB - requires high-speed)   View RediLink MD QC slide show 

 Product Index    

Last updated:  July 24, 2010