High Pressure Washout

The mixer washout system that really does a job

High Pressure Mixer Washout automatically cleans all types of mixer, from concrete to foods, and many other types of vessel. Faster cleanup gives 15 to 30 minutes extra production each day. As a result, you can increase your productivity by 5% every day, at no extra cost and it guarantees safety; no need to enter the mixer. Hence, payback is a few months in most cases. You will have better employee morale and safety

The easily installed rotating jets are fully automatic. The high pressure pump unit, 1000 psi pressure at full flow of 20 gpm, suits all concrete mixers up to 12000/8000 (10.5 yd) size as well as many other applications. We size the mixer washout reservoir for a full wash cycle with automatic refill and low-water pump shutoff. Coupled with Scale-Tron’s control unit, the complete system is a highly effective, reliable and flexible solution that automatically cleans all types of mixer. The Washout Video explains how it cleans so effectively and how it can pay for itself in a short time.


Empower your crew

Empower your crew by eliminating most of the arduous end of day mixer cleaning routine. Consequently, save on cost of cleanout labor. Proven European washing heads have powerful high pressure jets that rotate as well as turning for effective mixer cleaning

  • Offset head positions eliminate shadow behind shafts in single and twin-shaft mixers.

  • We build the pump unit on a steel channel frame for long life.

  • Reservoir capacity is 150 gallons; plenty of reserve for even the biggest job.

  • Reservoir and high pressure mixer washout pump are separate, allowing location in tight corners if required.

  • Hand-wash high pressure washout gun and hose are included.

  • Compatible with all types of concrete mixer except rotating drum type, plus many other applications.

  • Companion control system includes starter and safety disconnect switch to give manual, timed wash or fully automatic cleaning of your concrete mixer, food mixer or many other vessels.

  • You can change Nozzles and heads to suit different applications, pump pressures and rates.

  • You can order it as a complete kit or individual components, buy or lease. Pay for it with the extra production it gives.


Our High Pressure Washout gives tremendous performance and it saves 1/2 hour every day. The hand cleanup gun is a powerful tool. Buzz Morgan, Lindsay precast. December 2015


Pump unit and Controller, Specifications

2550-20 – 20 gpm pump, 1000 psi, suitable for high pressure washout of all mixers up to 12000/8000 (10.5 yd) size. Feeds heads in sequence through high pres

sure valves.


Dimensions: 40” W x 28”D x 60” H with reservoir.


Reservoir – 150 gal cylindrical polyethylene, 28” x 56” H with high/refill/low sensors and solenoid filling valve.


Power – specify 380 or 415V 50 Hz, 480 V or 575 V 60 Hz 3-phase when ordering.


Hand wash gun – high flow, high power, heavy-duty gun, suitable for blasting hard-to-reach deposits off mixer surfaces and general clean-up work, supplied with 20 ft hose.


Control system

Internal PLC gives the ultimate in functionality. You can choose manual operation, timed mixer washout cycle or remote cleanout control from batching controller. You can also use it as a concrete inter-batch wash. Just time the water (because the pump delivers constant volume per minute, which is as good as metering) or meter it. As a result, the water can be used in the subsequent batch.